IBM Aptiva Series - Page 73

2-20
Table 2- 2 Error Symptoms List
Error Symptoms Action/FRU
CD-ROM drive does not
load when system is
powered on, CD-ROM
LED li
g
hts off, and the
eject button is pressed
and held.
CD-ROM drive power.
"CD-ROM Drive" on page 2-26.
CD-ROM drive
CD-ROM drive does not
eject when system is
powered on, CD-ROM
LED li
g
hts off, and the
eject button is pressed
and held.
“CD-ROM Emer
g
ency-exit Option” on
page 5-16, 5-17.
CD-ROM drive power.
"CD-ROM Drive" on page 2-26.
CD-ROM drive
CD-ROM drive does not
read data files and no
error codes or
messa
g
es are
displayed.
Cannot read from Drive
E. Retry loadin
g
CD
messa
g
e is displayed
with disc loaded in CD-
ROM drive.
CD may have dirt or forei
g
n material
on it, check with a known good disc.
CD-ROM drive.
CD-ROM drive does not
play an audio disc. But
system function works
properly and CD-ROM
drive reads data files.
Audio cable on CD-ROM drive is not
connected to system board properly
if music can be heard throu
g
h
headphones.
Speaker power/connection/cable.
Audio-I/O card connection/cable.
CD-ROM drive.
Real-Time Clock
Real-time clock is
inaccurate.
Ensure the information in the Date and
Time of BIOS Setup are correct.
RTC battery. See “RTC Lithium
Battery” on page 4-28.
System board