56
Session Parameters
Session Parameters are parameters that are specific to the emulation
selected in the current session. These include three types of parameters:
Setup-Edit keys, Setup, and Modes.
♦ Setup-Edit Keys: Function and Edit keys and the Answerback message.
♦ Setup Parameters: All other Setup variables that are not included in Setup
Parameters in Terminal Parameters (all global settings).
♦ Mode Parameters: Variables that are used by a session’s emulation, but are
not selectable through Setup. Some examples are Protect Mode,
Graphics Mode, Insert Mode, Aux Mode, Split-Screen, Transparent Mode,
Character Set mappings, Setup Language, and Sessions.
Page Reset
Page resets are executed when the session or terminal is reset or defaulted.
When a page reset is performed, it affects all pages, and the following events
occur: the page is erased, the cursor is homed, and scrolling regions are
defaulted. All line attributes (such as double-high/wide, locked lines) are
reset to normal. Split screens are cleared to a normal, single screen and
protect mode is turned off.
To Next Page
Loading...
