Table 14. Weight of an enclosure with 92 SAS drives (continued)
FRU description
Approximate weigh per unit
Maximum
supported
Approximate extra weight
kg lb kg lb
3.5-inch Near-
Line SAS hard
disk drive
0.876 1.931 92 80.592 177.675
As you install or replace FRUs, the overall weight of the expansion enclosure increases. For example,
Table 15 on page 48 shows the weight progression as different combinations of FRUs are installed.
Table 15. Enclosure weight as FRUs are installed
Enclosure assembly Approximate weight
FRUs installed FRUs not installed kg lb
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
• Drives
• Cover
42.5 93.7
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
• Drives
• Cover
44.3 97.7
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
• Drives
• Cover
58 127.9
48 SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide
To Next Page
Loading...
