4. Place the FIB (shown in Figure 109) in a safe location.
5. If needed, repeat steps 2 on page 112 through 3 on page 113 to remove the
other FIB.
Replace the fan interface board
6. To reinstall a fan interface board, or replace it with one from FRU stock, follow
the procedure in “Installing or replacing a fan interface board: 2076-92F” on
page 86.
Replacing an enclosure: 2076-92F
You can replace a faulty enclosure of a 2076-92F expansion enclosure with a new
one from FRU stock.
Before you begin
DANGER
Multiple power cords. The product might be equipped with multiple power
cords. To remove all hazardous voltages, disconnect all power cords. (L003)
Figure 109. FIB parts removed from the chassis
114 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide
To Next Page
Loading...
