Table 19. Expansion canister and SAS port LEDs (continued)
Name Color State Meaning
▌4▐ and ▌6▐ SAS link fault Amber Off No faults are detected.
All four phys have a link
connection.
On Several error conditions
are possible:
v Only 1, 2, or 3 phys
are connected, but not
all 4.
v The phys are not
operating at the same
speed.
v All phys are not
connected to the same
remote port. One or
more of the connected
lanes are attached to a
different address.
▌5▐ and ▌7▐ SAS link
operational
Green Off No link connection on
any lane. The connection
is down.
On The SAS link is active. At
least one of the four
lanes is connected.
Storwize V7000 2076-92F expansion enclosure parts
On the 2076-92F expansion enclosure, all replaceable parts are customer-replaceable
units (CRUs).
Expansion enclosure drives
Table 20 summarizes the types of SAS drives that are supported by the 2076-92F
expansion enclosure. The 2076-92F expansion enclosure is supported on Storwize
V7000 Gen2 and Storwize V7000 Gen2+ systems.
Table 20. Supported expansion enclosure SAS drives
Description FRU part number
600 GB 15 K disk drive 01LJ061
1.2 TB 10 K disk drive 01LJ062
1.8 TB 10 K disk drive 01LJ063
6 TB 7.2 K Near-Line SAS disk drive 01LJ064
8 TB 7.2 K Near-Line SAS disk drive 01LJ065
10 TB 7.2 K Near-Line SAS disk drive 01LJ066
12 TB 7.2 K Near-Line SAS disk drive 01LJ179
1.6 TB 2.5-inch flash drive 01LJ067
3.2 TB 2.5-inch flash drive 01LJ068
1.92 TB tier 1 flash drive 01LJ069
3.84 TB tier 1 flash drive 01LJ070
Chapter 2. Installing the system hardware 137
To Next Page
Loading...
