LEDs on the front of the expansion enclosure
As Figure 123 shows, the front of the 2076-92F expansion enclosure contains LEDs
for the display panel (▌1▐) and for each of the power supply units (▌3▐).
▌1▐ Display panel LEDs
▌2▐ Rack retention thumb screws
▌3▐ Power supply unit LEDs
▌4▐ Power supply units (PSUs)
▌5▐ PSU fascia (1U)
▌6▐ Front fascia (4U)
The display panel (▌1▐) contains three LEDs that describe the operational status of
the expansion enclosure. Table 14 describes the function and meaning of the LEDs
on the front display panel.
Table 14. Display panel LEDs
Function Color Status Description
Power Green On The expansion enclosure
power is on; this LED is
controlled by the expansion
enclosure.
Off The expansion enclosure
power is off.
Identify Blue On Identifies the expansion
enclosure; this LED is
controlled by the system.
Use the management GUI
or service interface to
identify an enclosure.
Off The expansion enclosure is
operating normally.
Figure 123. LEDs on the front of the expansion enclosure
130 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide
To Next Page
Loading...
