IBM Storwize V7000 Gen2+ - Connectors for the Cable Management Arm; Install the Inner Connector of the Upper CMA

▌1▐ Inner connector on upper CMA
▌2▐ Connector base on inner rail member
▌3▐ Outer connector on upper CMA
▌4▐ Connector base on outer rail member
▌5▐ Support rail connector on upper CMA
▌6▐ Connector base on outer rail member
2. Install the inner connector of the upper CMA assembly (▌1▐) to the inner
member of the left support rail (▌2▐), as shown in Figure 56.
3. Install the outer connector of the upper CMA assembly (▌3▐) to the outer
member of the left support rail (▌4▐), as shown in Figure 57 on page 63.
svc01035
1
2
3
4
5
6
Figure 55. Connectors for the cable management arm
1
4
2
svc01036
Figure 56. Install the inner connector of the upper CMA to the inner member of the support rail
62 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide