IBM Storwize V7000 Gen2+ - Example Installation of the Enclosure in the

v Ensure that the drives are easily accessible. Avoid installing the 2076-92F
expansion enclosure above position 22U in the rack.
If you are reinstalling the expansion enclosure in the rack after you performed a
service task (for example, replacing the enclosure), you must also perform the
following tasks:
v Reinstall all of the following parts:
– Cover
– Drives
– Fan modules
– Power supply units and 1U fascia
– Secondary expander modules
– Expansion canisters (and SAS cables)
v Reconnect both power cables to the expansion enclosure.
Procedure
1. Fully extend the left and right drawer sections from the rack to lock the rails in
the extended position (▌1▐ in Figure 43 on page 53).
svc00986
Figure 42. Example installation of the enclosure in the rack
52 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide