IBM Storwize V7000 Gen2+ - Identify the Hardware Components: 2076-92 F; Features on the Front of the 2076-92 F

Table 11. Enclosure weight as FRUs are installed (continued)
Enclosure assembly Approximate weight
FRUs installed FRUs not installed kg lb
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v 92 3.5-inch Near-Line
SAS hard disk drives
v Cover
138.6 305.6
Conversely, the overall weight of the expansion enclosure is reduced as you
remove parts. However, even with parts removed, the 5U expansion enclosure is
heavy. Depending on the number of parts that remain, you might need four
persons or a mechanical lift to support the weight of the expansion enclosure.
Identify the hardware components: 2076-92F
You should become familiar with the external components of the 2076-92F
expansion enclosure.
Components on the front of the enclosure
Figure 26 shows the front of the 2076-92F expansion enclosure. In the figure, all
parts are installed in the enclosure.
▌1▐ Display panel indicators
▌2▐ Rack retention thumb screws
▌3▐ Power supply unit indicators
svc00960
1
2
5
6
2
3
4
Figure 26. Features on the front of the 2076-92F expansion enclosure
40 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide