IBM Storwize V7000 Gen2+ - Page 61

Table 11. Enclosure weight as FRUs are installed (continued)
Enclosure assembly Approximate weight
FRUs installed FRUs not installed kg lb
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia (1U and 4U)
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v Display assembly
v Drives
v Cover
58 127.9
Note: The following FRUs
are installed when the
enclosure is initially
shipped.
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v Display assembly
v Cover
v Fascia (1U and 4U)
v Drives
61.5 135.4
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia (1U and 4U)
v PSUs
v Expansion canisters
v Fan modules
v Fan interface boards
v 92 2.5-inch tier 1 flash
drives
v Cover
78.6 173.3
v Enclosure (01LJ607 or
01LJ112)
v Secondary expansion
modules
v Fascia
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v 92 2.5-inch hard disk
drives
v Cover
86 189.6
Chapter 2. Installing the system hardware 39