▌4▐ Power supply units (PSUs)
▌5▐ PSU fascia (1U)
▌6▐ Front fascia (4U)
However, as Figure 27 shows, the 4U and 1U fascias are packaged separately. You
must attach them to the front of the 2076-92F expansion enclosure as part of the
initial installation process.
Components on the rear of the enclosure
Figure 28 on page 42 shows the components on the rear of the 2076-92F expansion
enclosure. Four fan modules and two expansion enclosures are accessible from the
back of the enclosure.
Figure 27. Front fascia of the 2076-92F expansion enclosure
Chapter 2. Installing the system hardware 41
To Next Page
Loading...
