IBM Storwize V7000 Gen2+ - Figures

Figures
1. Rear view of a Storwize V7000 control enclosure 6
2. Data ports in the rear of the Storwize V7000
control enclosure ........... 7
3. Control enclosure support rails ...... 8
4. Rear view of a Storwize V7000 expansion
enclosure.............. 8
5. SAS ports and LEDs in rear view of a Storwize
V7000 expansion canister ........ 9
6. Expansion enclosure support rails ..... 9
7. Release handle serial label........ 11
8. Control enclosure support rails ...... 13
9. Hole locations in the front of the rack .... 14
10. Opening the hinge brackets ....... 15
11. Closing the hinge brackets ....... 15
12. Expansion enclosure support rails ..... 16
13. Installing the rail spring ........ 17
14. Hole locations in the front of the rack .... 18
15. Opening the hinge brackets ....... 19
16. Closing the hinge brackets ....... 19
17. Removing enclosure end caps ...... 20
18. Inserting the enclosure ......... 21
19. Securing the front of the enclosure ..... 21
20. Reinstalling enclosure end caps ...... 22
21. Connecting the SAS cables ....... 23
22. Connecting the SAS cables ....... 24
23. SAS cable connectors ......... 25
24. Connecting the SAS cables ....... 27
25. Connecting the SAS cables ....... 28
26. Features on the front of the 2076-92F
expansion enclosure.......... 40
27. Front fascia of the 2076-92F expansion
enclosure ............. 41
28. Features on the rear of the 2076-92F expansion
enclosure ............. 42
29. 2076-92F support rails ......... 43
30. 2076-92F CMA assemblies........ 43
31. Tray containing expansion enclosure parts 44
32. Packaging materials .......... 45
33. Packaging for fascia.......... 46
34. Releasing the 2076-92F cover ....... 47
35. Removing the 2076-92F cover ...... 48
36. Support rails ............ 48
37. Detaching the inner rail section ...... 49
38. Screw locations to attach the inner rail to the
enclosure ............. 49
39. Attaching the inner rail section to the
enclosure ............. 50
40. Installing the rail assembly to the rack frame 50
41. Example of the required rack space .... 51
42. Example installation of the enclosure in the
rack ............... 52
43. Replacing the 2076-92F enclosure in the rack 53
44. Expansion canister .......... 54
45. Install the expansion canister....... 55
46. Upper and lower cable-management arms 56
47. Connectors for the upper cable management
arm ............... 57
48. Components of the lower CMA assembly 58
49. Upper and lower CMA assemblies moved
aside ............... 59
50. Lower CMA assembly moved ...... 59
51. Release the upper CMA assembly ..... 60
52. Release the lower CMA assembly ..... 60
53. Upper and lower cable-management arms 61
54. Upper and lower cable-management arms 61
55. Connectors for the cable management arm 62
56. Install the inner connector of the upper CMA
to the inner member of the support rail ... 62
57. Install the outer connector of the upper CMA
to the outer member of the support rail ... 63
58. Attach the support rail connector of the upper
CMA to the right support rail ...... 63
59. Comparing the location of the components of
the CMA assemblies ......... 64
60. Aligning the 2076-92F top cover...... 65
61. Replacing the 2076-92F top cover ..... 66
62. Locking the top cover ......... 66
63. Drive assembly ........... 67
64. Drive locations in a 2076-92F expansion
enclosure ............. 68
65. Correct drive installation ........ 68
66. Incorrect drive installation ....... 69
67. Replace the drive .......... 70
68. Location of secondary expander modules 72
69. LEDs on a secondary expander module 73
70. Open the secondary expander module handles 73
71. Replace the secondary expander module 74
72. Fascia components on the expansion enclosure 75
73. Replace fascia components on the expansion
enclosure ............. 76
74. Preparing to install the power supply .... 77
75. Install the power supply ........ 78
76. Power supply indicators ........ 79
77. Fascia components on the expansion enclosure 80
78. Remove fascia components from the expansion
enclosure ............. 81
79. Fascia removed from the PSUs ...... 82
80. Correct orientation for SAS cable connectors 83
81. Example of SAS cables routed through the
cable management arms ........ 84
82. SAS cable correctly inserted into the SAS port 85
83. Fan module orientation ........ 86
84. Replace fan module .......... 86
85. FIB parts for the chassis ........ 87
86. Insert the new FIB in the chassis ..... 88
87. Secure the FIB to the drive board ..... 88
88. Replace the FIB cover ......... 89
89. Removing the 2076-92F enclosure from the
rack ............... 96
90. Releasing the power supply handles .... 98
91. Removed power supply ........ 99
© Copyright IBM Corp. 2014, 2018 v