IBM Storwize V7000 Gen2+ - Weight of Expansion Enclosure Parts; Weight of Expansion Enclosure Drives

Table 8. Weight of expansion enclosure parts (continued)
FRU
description
FRU part
number
Weight per unit
Quantity
shipped
Total weight
kg lbs kg lb
Top cover 01LJ132 3.720 8.201 1 3.720 8.201
Fan interface
board
01LJ134 0.118 0.260 1 0.236 0.260
Weight of expansion enclosure SAS drives
The SAS drives are shipped in a separate package from the 5U expansion
enclosure. The enclosure can support up to 92 SAS drives; however, the quantity
varies depending on the number of drives ordered.
Table 9 summarizes the weights of the SAS drives that are supported in the 5U
expansion enclosure. Storwize V7000 Gen2+ systems that are running software
level 7.8 can support the 5U expansion enclosure.
Table 9. Weight of expansion enclosure drives
FRU description FRU part number
Approximate weight per unit
kg lb
600 GB 15 K 2.5-inch hard
disk drive
01LJ061 0.304 0.670
1.2 TB 10 K 2.5-inch hard
disk drive
01LJ062 0.304 0.670
1.8 TB 10 K 2.5-inch hard
disk drive
01LJ063 0.304 0.670
6 TB 7.2 K 3.5-inch
Near-Line SAS hard disk
drive
01LJ064 0.876 1.931
8 TB 7.2 K 3.5-inch
Near-Line SAS hard disk
drive
01LJ065 0.876 1.931
10 TB 7.2 K 3.5-inch
Near-Line SAS hard disk
drive
01LJ066 0.876 1.931
1.6 TB 2.5-inch tier 0 flash
drive
01LJ067 0.224 0.494
3.2 TB 2.5-inch tier 0 flash
drive
01LJ068 0.224 0.494
1.92 TB 2.5-inch tier 1 flash
drive
01LJ069 0.224 0.494
3.84 TB 2.5-inch tier 1 flash
drive
01LJ070 0.224 0.494
7.6 8 TB 2.5-inch tier 1 flash
drive
01LJ071 0.224 0.494
15.36 TB 2.5-inch tier 1
flash drive
01LJ072 0.224 0.494
Chapter 2. Installing the system hardware 37