IBM System Storage DS5020 User Manual

Storage subsystem and controller information record
Table 24 provides a data sheet for recording storage subsystem names,
management types, Ethernet hardware addresses, and IP addresses. Make a copy
of this table and complete the information for your storage subsystems and
controllers. Use the information to set up the BOOTP table for the network server
and the host or Domain Name System (DNS) table. The information is also helpful
if you add storage subsystems after initial installation. Refer to your Storage
Manager documentation for detailed instructions about how to obtain the
information. For a sample information record, see Table 25 on page 173.
Table 24. Storage subsystem and controller information record
Storage
subsystem
name
Management
method
Controllers-Ethernet and IP
addresses, and host name
Host-IP address
and host name
172 IBM System Storage DS5020 Storage Subsystem: Installation, User’s, and Maintenance Guide

IBM System Storage DS5020 Specifications

General

Brand	IBM
Model	System Storage DS5020
Category	Storage
Language	English