Rev 2015-03-02 3
GV10x OPERATION AND SAFETY MANUAL
Warnings
The GV10x Controller and Source contain warning labels where appropriate
to identify potentially hazardous areas. Operation, installation and
maintenance should be performed by qualified personnel.
To avoid possible shock or fire hazards, connection
of this product should be performed in compliance
with the ANSI electrical code.
If the system is operated with open or loosely
attached panels and covers, RF radiation can be
emitted at unacceptable levels.
When observing the plasma emission from the
plasma tube, one should wear UV-filtering glasses
since UV light is emitted.
NOTE: If the GV10x Source and/or Controller are used in a manner
not specified in this manual, the safety protection provided by the
equipment may be impaired.
To Next Page
Loading...