Rev 2015-03-02 30
GV10x OPERATION AND SAFETY MANUAL
B.5. Training Requirements
The GV10x should be operated by a person already experienced with high vacuum analytical
instrumentation where carbon and hydrocarbon contamination adversely affects quantitative results.
No GV10x training is needed beyond familiarity with Operation and Safety Manual, and the
proper adherence to instructions therein.
B.6. Emergency Contact Information
Customer Service
ibss Group, Inc.
1559B Sloat Blvd. 270
San Francisco, CA 94132
1.415.566.5774
admin@ibssgroup.com
B.7. Applicable Laws and Regulations
Please follow all applicable local and national codes to ensure maximum safety of the equipment
and personnel. The installation and operational environment must be maintained per the latest
revision of these codes.
It is your responsibility to determine the codes to be followed, and to verify the compliance of
equipment, installation, and operation with the latest revision of these codes.
Plan for Safety
It is an absolute must to follow all applicable sections of:
• The National Fire Code
• The National Electrical Code (NEC)
• The National Electrical Manufacturer’s Association (NEMA) codes.
Local regulatory and government offices usually provide excellent help to determine which
codes and standards are necessary for safe installation and operation.
To Next Page
Loading...
Need help?
General