Rev 2015-03-02 11
GV10x OPERATION AND SAFETY MANUAL
2. Unpacking the GV10x
2.1. Unpacking and Inspection
Before removing the GV10x Controller and Source from the original shipping carton,
perform a visual inspection. Report any apparent damage to ibss Group if the shipping
carton is punctured or broken.
2.1.1. Unpacking: Keep all packing materials until inspection and acceptance testing is
complete. Shipping carton should be retained long term, recycled or returned to
ibss Group for credit.
2.1.2. Inspection: Perform a visual inspection of shipped items to confirm no visible
damage:
2.1.2.1. Source
2.1.2.2. Controller
2.1.2.3. Cable Bundle: RF coax & Control cables
2.1.2.4. AC line cord
2.1.2.5. Operation and Safety Manual
2.1.2.6. GV10x Remote Control Software Installation CD
2.1.2.7. Optional items as noted on the packing list
2.2. Repacking for Shipping
To return the GV10x Asher, first contact ibss Group and get a Return Merchandise
Authorization [RMA]. ibss Group will instruct you to repack one or all items depending
on your circumstances. If possible use the original shipping carton.
2.2.1. No special handling devices are required for safe shipping.
2.2.2. Repacking the Controller: place in fitted slot in packing.
2.2.3. Repacking the Source: place in fitted slot in packing.
2.2.4. If original packing materials and carton are not available, carefully pack items
with 4” shock absorbing surrounding material.
2.3. Recycling
At the end of the GV10x DS Asher life cycle, recycling should be done in a manner
approved by local regulations. Alternatively you may return the GV10x to ibss Group.
To Next Page
Loading...
Need help?
General