8.5-2
Before proceeding with the priming procedure, please read the following instructions
carefully. At each step of the priming process, the CLARiTY™ Operator Screen will display
the next action required.
ICE Torus 500 Priming Kit (complete with one bottle of ink), part number – 402282
If additional ICE Torus 500 ink is required, part number – 402473
Below, Figure 8.5-2, is an illustration of the priming kit and connections to the printer
required.
Figure 8.5-2
Vacuum Gauge
Priming Ink
Reservoir
Power Cable
Glass Bottle
Vacuum Sealing
Plate
‘Priming Ink Reservoir’
Connector
to Printhead
Priming Ink
Reservoir
Supply Pipe
Vacuum Tap
To Next Page
Loading...