86
13
OTHER FUNCTIONS
13
■ Data cloning
Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another; or , data
from a personal computer to a transceiver using the optional
CS-2200H
CLONING SOFTWARE
.
D Cloning between transceivers
q Connect the OPC-474 cloning cable to the [SP] jack of the
master and sub-transceivers.
• The master transceiver is used to send data to the sub-trans-
ceiver.
w
While pushing
[M/CALL
]
,
turn power ON to
enter cloning mode (mas-
ter transceiver only—
power on only for sub-
transceiver).
• “CLONE” appears and the
transceivers enter the clone
standby condition.
e Push [S.MW ] on the
master transceiver.
• “CL OUT” appears in the
master transceiver’s display
and the S/RF indicator shows
that data is being transferred
to the sub-transceiver.
• “CL IN” appears automati-
cally in the sub-transceiver’s
display and the S/RF indica-
tor shows that data is being
received from the master
transceiver.
r When cloning is finished,
turn power OFF, then ON
to exit cloning mode.
MW
To Next Page
Loading...
