30
7
OTHER FUNCTIONS
7
• Lockout CB
Select the transmission lockout (temporary transmission
inhibit) capability from OFF, Busy and Rpt 1 for CB mode.
- OFF: No restriction for receiving a signal.
- BUSY (Busy Lockout): Transmission is inhibited while receiving a
signal.
- RPT1 (Repeater Lockout (1)): Transmission is permitted only while
receiving a matched CTCSS tone, or receiving no signal.
• Scan stop timer
The scan resume condition can be selected as a pause or
timer scan.
- T-5/10/15 : Scan pauses 5/10/15 sec. while receiving a signal.
- P-5 : Scan pauses until the signal disappears and then
resumes 5 sec. thereafter.
• SelCall Format
Select the SelCall format from CCIR, ZVEI1, ZVEI2, DZVEI,
EEA, EEA2, DAPL, TP40, TP100, DTMF, IC20 and INH.
• The optional UT-108
DTMF DECODER UNIT
is required to select
“DTMF”.
• “TP40” and “TP100” are compatible with other manufacture’s CB
transceiver SelCall.
• Long tone
Select the long tone function to activate the long tone capa-
bility for CB mode.
• SelCall sequence
Select the own ID code sending sequence from ST and
ST-ID.
- ST : Does not send the ID code.
- ST-ID: Sends the ID code after sending station or group code.
To Next Page
Loading...
