Icom IC-400PRO Instruction Manual

2
1
PANEL DESCRIPTION
1
t [DUP] KEY*
➥
NN
NN
Push to toggle the transmit frequency mode between
duplex and simplex. (CB channel 1 to 8 only)
• Duplex: The set TX frequency is used for the transmission.
• Simplex: The set RX frequency is used for the transmis-
sion.
➥
NN
NN
Push and hold to set the selected channel to priority
or normal.
• Priority channel is used for both group and priority scans.
➥
FF
FF
Push to toggle the 5tone mute activity between CONT
(Continuous Tone) and SGL (Single Tone).
• CONT: SelCall mute is released.
• SGL: SelCall mute is activated. In this case, [PTT] switch
action is inhibited while SelCall mute is activated.
y [SCN] KEY*
➥
NN
NN
Push to start or stop the scan.
➥
NN
NN
Push and hold to enter the scan type selection mode.
• Push []/[]to select the desired scan type.
• Push [SCN] to set the channel as a tag channel.
- “
S
” appears for tag channels.
➥
FF
FF
Push to recall the received ID code.
• Push []/[]to select the record.
u [MONI] KEY*
➥
NN
NN
Activates the following functions on each channel
independently:
• Push and hold the key to release the mute to the channel
(audio is emitted; ‘Audible’ condition).
- “” appears.
• During “” appears, push the key to mute the channel
(sets to ‘Inaudible’).
NOTE: The unmute condition (‘Audible’ condition)
may automatically return to the mute condition
(‘Inaudible’ condition) after a specified time period
depending on the pre-setting.
➥
FF
FF
Push to transmit the SelCall code on the selected
channel.
➥
FF
FF
Push and hold to enter the SelCall code/code number
selection mode (p. 17).
• Push []/[]to select the desired code/code number.
*Information
Up to two desired functions, one each for Normal and
Function mode, can be re-assigned to [], [], [
O
],
[DUP], [SCN] and [MONI] keys with the optional CS-
400PRO
CLONING SOFTWARE . (p. 34)
The default setting is used in this instruction manual, for
description.
➥
NN
NN
: Stands for Normal mode operation.
➥
FF
FF
: Stands for Function mode operation.
IC-400PRO.qxd 03.6.19 6:13 PM Page 2 (1,1)

Icom IC-400PRO Specifications

General

Brand	Icom
Model	IC-400PRO
Category	Transceiver
Language	English