EasyManua.ls Logo

Icom IC-9700 - Page 13

Icom IC-9700
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1-5
!9 OVF ICON
Displayed when an excessively strong signal is
received.
@0 PREAMPLIFIER/ATTENUATOR ICONS
/
Displayed when one the Preampli ers is ON, or the
Attenuator is ON.
@1 NOTCH INDICATOR
Displays “AN” when the Auto Notch function is ON,
and “MN” is displayed when the Manual Notch
function is ON.
@2 NOISE BLANKER/TONE/DIGITAL SQUELCH
ICONS
/
Displayed when the Noise Blanker function is ON,
when various tone functions are ON, or when
various digital squelch functions are ON.
@3 NOISE REDUCTION/AUTO TUNE INDICATORS
Displays “NR” when the Noise Reduction function is
ON.
Displays “AUTOTUNE” when the Auto Tuning
function is ON.
@4 EMR/BK/PACKET LOSS/AUTO REPLAY ICONS
/ / /
/
Displayed when the EMR (Enhanced Monitor
Request) function is ON, when the BK (Break-in)
function is ON, when Packet loss has occured, or
when the Automatic Reply function is ON.
@5 AGC ICON
(p� 3-9)
Displayed while the Auto Gain Control (AGC) is ON.
@6 AFC/
1
/
4
ICON / (p� 8-5)
is displayed
while the Auto Frequency
Control (AFC) is ON.
is displayed while the 1/4 Tuning function is
ON. (p. 3-5)
@7 MULTI-FUNCTION METER (p� 3-11)
Displays various values and levels, depending on
the function that you selected.
@8 RX STATUS INDICATOR
Lights green when a signal is received, or the
squelch is open.
@9 RF GAIN ICON
(p� 3-10)
Displayed when
AF RF/SQL
(outer) is set to the
counterclockwise from the 11 o’clock position. The
icon indicates that the RF gain is reduced.
#0 MAIN BAND FREQUENCY READOUT
SUB BAND FREQUENCY READOUT (p� 3-4)
Displays the transmit or receive frequency for the
Main and Sub bands.
#1 IF FILTER INDICATOR
(p� 4-4)
Displays the selected IF  lter number.
#2 MODE INDICATOR
(p� 3-3)
Displays the selected operating mode.
#3 TX STATUS INDICATOR
Displays the transmit status of the displayed
frequency.
is displayed while transmitting.
is displayed when the selected frequency is
outside of the band edge frequency range.
TX
is displayed when transmission is inhibited (p. 3-10)
@0 @1 @2 @3 @4 @5
@9
@9
#2
#2
@8
@8
#1
#1
#3
@6
#0
#0
@6
@3
@2
@1
@0
@4
@5
!9
!9
@7
@7

Table of Contents

Other manuals for Icom IC-9700

Related product manuals