Icom IC-9700 - Others

8
SET MODE
8-19
MENU
» SET > SD Card
Unmount
Unmounts the SD card.
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it. Otherwise the data
may be corrupted or deleted.
Others
MENU
» SET > Others > Information
Version
Displays the transceiver rmware’s version number.
MAC Address
Displays the transceiver’s MAC address.
MENU
» SET > Others > Clone
Clone Mode
Selects to enter the clone mode to read or write the
CS-9700 data from or to the PC.
LRestart the IC-9700 to cancel the clone mode.
MENU
» SET > Others
Touch Screen Calibration
Touch to adjust the touch screen.
LSee the Advanced Manual for details.
MENU
» SET > Others > Reset
Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents) without
clearing the items below:
• Memory channel contents
• Call sign memories
• Message contents
• DTMF memory contents
• GPS memory contents
• Repeater list contents
• Network settings
• REF Adjust
• Fixed Edges
• Allowed call sign list contents
LSee “Resetting” (p. 10-2) for details.
All Reset
Clears all data and returns all settings to their factory
defaults.
Memory channel contents, lter setting and so on
will all be cleared, so you will need to rewrite your
operating settings.
LSee “Resetting” (
p. 10-2) for details.
SD Card (Continued)