Icom IC-9700 - Connectors

8
SET MODE
8-11
Connectors
MENU
» SET > Connectors > External P�AMP
144M (Default: OFF)
430M (Default: OFF)
1200M (Default: OFF)
Selects whether or not to use an external preamplier,
for each band.
The preampliers amplify received signals to improve
the S/N ratio and sensitivity.
• OFF: Does not use an external preamplier.
• ON: Uses an external preamplier.
MENU
» SET > Connectors
External Speaker Separate (Default: Separate)
Sets the audio output when the external speaker is
connected.
• Separate: The MAIN band audio is output from the
[EXT-SP MAIN] jack, and the SUB band
audio is output from the [EXT-SP SUB]
jack.
• Mix: Mix and output the audio of the MAIN
band and SUB band.
MENU
» SET > Connectors > Phones
Level (Default: 0)
Sets the audio output level ratio of the headphone and
internal speaker between -15 and +15.
L/R Mix (Default: Auto)
Sets the audio output when the headphone is
connected.
• Separate: The MAIN band audio is output from
the left side, and the SUB band audio is
output from the right side.
• Mix: Mix and output the audio of the MAIN
band and SUB band.
• Auto: When the SUB band is displayed:
The MAIN band audio is output from
the left side, and the SUB band audio is
output from the right side.
When the SUB band is not displayed:
The MAIN band audio is output from the
left and right side.
MENU
» SET > Connectors > ACC AF/IF Output
AF/SQL Output Select (Default: MAIN)
Selects the audio and squelch signals to output from
the [ACC] (DIN 8-pin) socket in the MAIN/SUB bands.
• MAIN: Outputs the audio and squelch signals of the
MAIN band.
• SUB: Outputs the audio and squelch signals of the
SUB band.
Output Select (Default: AF)
Selects the signal output from [ACC].
• AF: An AF signal is output.
• IF: A 12 kHz IF signal is output.
AF Output Level (Default: 50%)
Sets the AF output level of [ACC], when “Output
Select” of ACC is set to “AF.”
AF SQL (Default: OFF (Open))
Selects whether or not to output the audio from [ACC],
according to the squelch state, when “Output Select”
of ACC is set to “AF.”
• OFF (Open): The squelch is always opened
regardless of the transceiver’s squelch
level.
• ON: The squelch opens and closes,
according to the transceiver’s squelch
level.
AF Beep/Speech��� Output (Default: OFF)
Sets the Beep and Speech audio output setting of
[ACC], when “Output Select” of ACC is set to “AF.”
• OFF: The beep and speech audio are not output.
• ON: The beep and speech audio are output.
IF Output Level (Default: 50%)
Sets the IF output level of [ACC], when “Output
Select” of ACC is set to “IF.”