Icom IC-9700 - D about the Electronic Keyer Function

4
RECEIVING AND TRANSMITTING
4-12
Operating CW (Continued)
EDIT
D About the electronic Keyer function
You can set the Keyer Memory function settings,
paddle polarity settings, and so on of the Electronic
Keyer.
1. Select the CW mode.
2. Open the KEYER screen.
MENU
» KEYER
3. Touch [EDIT/SET].
• Opens the EDIT/SET screen.
KEYER screen
4. Select the desired item to set.
KEYER MEMORY edit menu
You can edit the Keyer memories
M1 to M8.
001 SET
CW-KEY SET
EXIT
KEYER 001 contest number
menu
You can set the following items.
• Number Style
• Count Up Trigger
• Present Number
CW-KEY SET menu
You can set the following items.
• Side Tone Level
• Side Tone Level Limit
• Keyer Repeat Time
• Dot/Dash Ratio
• Rise Time
• Paddle Polarity
• Key Type
• MIC Up/Down Keyer
EDIT/SET screen
Rotate
Push
5. To close the KEYER screen, push
EXIT
several
times.