Icom IC-9700 - Page 15

1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1-7
D Multi-function menus
z Open the Multi-function menu by pushing
MULTI
(Multi-function control).
z Open special menus by holding down
VOX/BK-IN
,
NB
,
NR
, or
NOTCH
for 1 second.
z While the Multi-function menu is open, touch the
desired item and rotate
MULTI
to set the desired
value.
Rotate
Push
Multi-function menu
Touch the edge to
turn ON or OFF
SSB SSB-D CW RTTY
RF POWER
*
2
RF POWER
*
2
RF POWER
*
2
RF POWER
*
2
MIC GAIN
*
2
MIC GAIN
*
2
KEY SPEED
*
2
TPF
*
1
COMP
*
1,
*
2
CW PITCH
*
2
MONITOR
*
1,
*
2
MONITOR
*
1,
*
2
MONITOR
*
1,
*
2
FM/AM/DV DD NB NR
RF POWER
*
2
RF POWER
*
2
LEVEL
*
2
LEVEL
*
2
MIC GAIN
*
2
TX INHIBIT
*
1
DEPTH
*
2
WIDTH
*
2
MONITOR
*
1,
*
2
NOTCH VOX BK-IN TX PWR LIMIT
POSITION
*
2
GAIN
*
2
DELAY
*
2
RF POWER
*
2
WIDTH
*
1
ANTI VOX
*
2
LIMIT
DELAY
*
2
VOICE DELAY
*
1
Multi-function menu items
*
1
Touch the edge to turn the function ON or OFF, or
when you want to adjust.
*
2
Touch the item for 1 second to enable
MULTI
.
When the Multi-function menu is closed,
MULTI
can
be enabled to adjust functions that are either on the
upper right three keys or in the Multi-function menus.
The function is displayed in the upper right edge of the
screen.
*
1
You can independently enable
MULTI
to adjust the
function for the MAIN and SUB bands .
*
2
On the Multi-function menus, touch the item for
1 second to assign the function to
MULTI
.
Multi-function dial
Function indicator for
MULTI
Indicator Action
RIT
*
1
Rotate Adjusts the RIT frequency.
Hold down Clears the RIT frequency.
kHz
*
1
Changes the operating frequency on the kHz
steps.
M-CH
*
1
Selects Memory channels.
Using the DR function, selects an individual
station or preset repeater.
PBT1
*
1
Rotate Adjusts the Shift value for PBT1.
Hold down Clears the Twin PBT setting.
PBT2
*
1
Rotate Adjusts the Shift value for PBT2.
Hold down Clears the Twin PBT setting.
RF PWR
*
2
Adjusts the transmit output power.
MIC G
*
2
Adjusts the microphone gain.
COMP
*
2
Adjusts the Speech Compressor level.
MONI
*
2
Adjusts the audio level for the Monitor function.
SPEED
*
2
Sets the Key speed.
PITCH
*
2
Sets the CW pitch.
NB LEV
*
2
Adjusts the Noise Blanker level.
NB DEP
*
2
Adjusts the DEPTH (Noise attenuation level).
NB WID
*
2
Adjusts the WIDTH (Blanking duration time).
NR LEV
*
2
Adjusts the transmit output power.
NOTCH
*
2
Adjusts the Notch frequency.
VOX G
*
2
Adjusts the VOX gain.
A-VOX
*
2
Adjusts the ANTI VOX level.
VOX D
*
2
Adjusts the VOX delay time.
BKIN D
*
2
Adjusts the Break-in delay time.