Icom IC-9700 - Page 59

8
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8-4
MENU
» SET > Function > SPLIT
SPLIT LOCK (Default: OFF)
Turns the Split Lock function ON or OFF.
The SPLIT LOCK function enables you to adjust the
transmit frequency while holding down
XFC
, even
while the Dial Lock function is activated.
To prevent accidentally changing the receive
frequency by rotating
MAIN DIAL
, use both the SPLIT
LOCK and Dial Lock functions (p. 3-10).
• OFF: Turns OFF the function.
• ON: Turns ON the function.
MENU
» SET > Function
Auto Repeater (Default: ON)
The Auto repeater function automatically turns the
duplex operation and tone encoder ON or OFF.
LThis item is displayed only in the USA version.
• OFF: Turns OFF the function.
• ON (DUP): Turns ON the duplex settings only.
• ON (DUP, TONE): Turns ON the duplex settings and
the tone encoder function.
RTTY Mark Frequency (Default: 2125)
Selects the RTTY mark frequency.
L When the internal RTTY decoder is used, 2125 Hz is
automatically selected.
RTTY Shift Width (Default: 170)
Selects the RTTY shift width.
L When the internal RTTY decoder is used, 170 Hz is
automatically selected.
RTTY Keying Polarity (Default: Normal)
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
MENU
» SET > Function > SPEECH
SPEECH Language (Default: English)
Sets the speech language to English or Japanese.
Alphabet (Default: Normal)
Selects the alphabet characters announcement.
SPEECH Speed (Default: Fast)
Sets the speech speed to Fast or Slow.
RX Call Sign SPEECH (Default: ON (Kerchunk))
Turn the RX Call Sign Speech function ON or OFF for
calls received in the DV mode.
RX>CS SPEECH (Default: ON)
Turn the RX>CS Speech function ON or OFF.
S-Level SPEECH (Default: ON)
Turns the S-meter level announcement ON or OFF.
• OFF:
The operating mode and the operating
frequency are announced when you push
SPEECH
.
• ON: The signal strength level, the operating mode
and the operating frequency are announced
when you push
SPEECH
.
MODE SPEECH (Default: OFF)
Turns the operating mode announcement ON or OFF.
• OFF:
The selected operating mode is not announced.
• ON: The selected operating mode is announced.
SPEECH Level (Default: 50%)
Sets the Voice Synthesizer audio output level.
MENU
» SET > Function
[SPEECH/LOCK] Switch (Default: SPEECH/LOCK)
Selects
SPEECH
action.
• SPEECH/LOCK: Pushing
SPEECH
turns ON the Voice
Synthesizer function.
Holding down
SPEECH
turns the Lock
function ON or OFF.
• LOCK/SPEECH: Pushing
SPEECH
turns the Lock
function ON or OFF.
Holding down
SPEECH
turns ON the
Voice Synthesizer function.
Lock Function (Default: MAIN DIAL)
This function electronically locks
MAIN DIAL
or the
panel display* to prevent accidental changes.
* Keys and dials are also locked except for
AF RF/SQL
,
AF RF/SQL
,
POWER
, and
SPEECH
.
Memo Pad Quantity (Default: 5)
Sets the number of memo pad channels.
MAIN DIAL Auto TS (Default: High)
Sets the Auto Tuning Step function for
MAIN DIAL
.
When rapidly rotating
MAIN DIAL
, the tuning step
automatically changes according to the rotation speed.
• OFF: Auto tuning step is turned OFF.
• Low: Approximately two times faster.
• High: Approximately ve times faster when the
tuning step is set to 1 kHz or smaller.
Approximately two times faster when the
tuning step is set to 5 kHz or larger.
MIC Up/Down Speed (Default: Fast)
Selects the steps per second when changing
an operating frequency by holding down the
microphone’s [UP]/[DN] key.
• Slow: Low speed (25 tuning steps/second)
• Fast: High speed (50 tuning steps/second)