Icom IC-9700 - Page 88

12
12-1
OPTIONS
Options
Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom
is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by Icom.
• MB-118
mounting bracket
To mount the transceiver inside a vehicle.
• MB-123
carrying handle
• OPC-2350LU
data cable
• SP-33
eXternal speaker
Designed for base station operation.
• SP-35
eXternal speaker
Designed for mobile operation.
• CT-17
ci-V conVerter
For remote transceiver control using a PC equipped
with an RS-232C port.
• RS-BA1 Version 2
ip remote control software
NOTE: To remotely control transceivers using the
RS-BA1, BE SURE to comply with your local regulations.
SM-30
desktop microphone
Desktop microphone with a
low frequency cut function.
HM-219
microphone
The same as supplied.
SM-50
desktop microphone
Dynamic microphone with
[UP]/[DOWN] switches.
PS-126
dc power supply
• Output voltage: 13.8 V DC
• Maximum output current:
25 A
SP-34
eXternal speaker
External speaker with high
and low frequency cut
functions.
SP-38
eXternal speaker
Designed to match the
IC-9700.
SP-41
eXternal speaker
Designed to match the
IC-9700.
About the free download software
You can download each manual and guide from the Icom website.
http://www.icom.co.jp/world/support/
Before using, read each manual and guide, and use it according to the instructions.
L To use to the software, the following items are required.
CS-9700
programming software
SD card
USB cable
RS-MS1A Android™
application
OPC-2350LURS-MS3A (For Android™ devices)
terminal mode/access point mode application
RS-MS3W (For Windows)
terminal mode/access point mode software
L To add or expand a function, or to improve the performance, the software version may be upgraded. Before
you update your software version, see the instructions and cautions described on the Icom website.