9
3
MEMORY OPERATION
02
03
n
Programming notes
ï Blank channel
A memory or group channel with no frequency content is
called as a blank channel. When a blank channel is selected
while memory programming, “–––––” appears instead of a
frequency.
ï Memory protect function
IC-A210E has a memory protect function. The function pre-
vents accidental changes or deletion.
The function can be set in the MENU mode (p. 22).
n
Entering memory mode
•Push[RCL] to enter the memory mode.
•Push[RCL] to set the selected memory channel frequency
to the standby frequency, then exit the memory mode.
•Holddown[RCL] for 2 seconds to exit the memory mode
without changing the previously set standby frequency.
n
Memory channel type
There are four memory types. The memory types are as fol-
low:
ï Regular memory channel (MEMORY)
There are up to 10 available memory channels.
ï Group memory channel (GRP01–GRP20)
There are up to 200 group channels, with 10 channels in
each of 20 groups.
ï History memory channel (HISTORY)
There are up to 10 available history memory channels.
The active frequency is written into history memory channels
automatically when pushing [↔] to exchange the active and
standby frequency.
ï GPS memory channel (GPS)
There are up to 10 available GPS memory channels.
When connected to an external GPS receiver* equipped with
an airport frequency database, the frequency data such as
nearby airports can be transferred into GPS memory chan-
nels.
*Ask your dealer for available GPS receiver details.
To Next Page
Loading...
Need help?
General
