Icom IC-A210E - Audio, Display, and Advanced Settings

21
5
MENU MODE
n
MENU mode
items
D AM Squelch Level “SQL LEVEL”
Set the squelch level for AM mode operation.
In order to receive signals properly, the squelch must be ad-
justed to the proper level.
•–010to 010 : Setting AM squelch level from –10 to +10.
D Headphone Level “HP LEVEL”
Set the headphone output level while receiving.
•AFgain  :Theoutputlevelissameas[VOL].
•OFF(0)  :Mutestheheadphone.
•001to080 :Setsaudiolevelfrom1to80.
D Intercom1 Microphone Audio Input Level
“INCOM LV1”
Set the intercom1 microphone input level.
•OFF(0)  :Mutestheintercom1microphone.
•001to080 :Setstheintercom1inputlevelfrom1to80.
D Intercom2 Microphone Audio Input Level
“INCOM LV2”
Set the intercom2 microphone input level.
•OFF(0)  :Mutestheintercom2microphone.
•001to080 :Setstheintercom2inputlevelfrom1to80.
D Intercom1 Squelch Level “MIC1 SQL”
Set the intercom1 squelch level.
The setting level is required to open the squelch when
speaking to the intercom1.
•OFF(0) :Turnsofftheintercom1squelch.
•001to030 :Setstheintercom1squelchlevelfrom1to30.
D Intercom2 Squelch Level “MIC2 SQL”
Set the intercom2 squelch level.
The setting level is required to open the squelch when
speaking to the intercom2.
•OFF(0) :Turnsofftheintercom2squelch.
•001to030 :Setstheintercom2squelchlevelfrom1to30.
D Automatic Noise Limiter “ANL”
The ANL (Automatic Noise Limiter) function reduces noise
components such as that caused by engine ignition systems
while receiving.
•OFF   :ANLfunctionOFF.
•ON    :ANLfunctionON.
05