13
3
MEMORY OPERATION
03
n
Regular memory channel
The transceiver has 10 regular memory channels.
Five programming options are selectable.
The following functions are available:
REPLACE, DELETE, REVIVE and CHANNEL NAME EDIT
functions.
q Push [RCL] to enter the memory mode.
•Thechannelnumberappears.
•Thememorychannelnamealsoappearsifithasbeenentered.
w Rotate [O-DIAL] to select the regular memory channel.
•“MEMORY”appears.
e Rotate [DIAL] to select the desired channel.
r Push [MEM], then rotate [O-DIAL] to select a menu op-
tion as follow.
•Thememorychannelnumberblinks.
t Push [MEM] to perform the selected action.
n
Group memory channel
The transceiver has 200 group memory channels comprised
of 10 channels in each of 20 groups.
The following functions are available:
REPLACE, DELETE, REVIVE, GROUP NAME EDIT and
CHANNEL TAG functions.
q Push [RCL] to enter the memory mode.
•Thechannelnumberappears.
•Thememorychannelnamealsoappearsifithasbeenentered.
w Rotate [O-DIAL] to select the group memory channel number.
•Agroupnumber“GRP01–GRP20”appears.
e Push [DIAL], and then rotate [O-DIAL] to select the
memory group from GRP01 to GRP20 if necessary.
•Thegroupandchannelnumbersblink.
r Rotate [DIAL] to select the desired channel within the se-
lected group.
•Push[DIAL] again, or push [RCL] to set the memory group.
t Push [MEM], rotate [O-DIAL] to select a menu as follows.
•Thememorychannelnumberblinks.
y Push [MEM] to perform the selected action.
CH01
127.005
122.00
RX
MEMORY
REPLACE Replace to the standby frequency.
DELETE Delete the memory channel.
REVIVE Revive the previous memory channel data.
CH NAME Edit the memory channel name.
DONE Do nothing and return to the memory mode.
REPLACE Replace to the standby frequency.
DELETE Delete the memory channel.
REVIVE Revive the previous memory channel data.
GRP NAME Edit the group name.
CH TAG Set the memory channel as a tag channel.
DONE
Do nothing and return to the memory mode.