Icom IC-A24 - Programming Memory Channels; Programming Memory Names

13
4
MEMORY OPERATION
Programming a memory channel
■
The transceiver has 200 (20 CH × 10 BANK) memory chan-
nels for storage of often-used frequencies.
q Push [CLR•DEL] to select the frequency mode, if neces-
sary.
w Select the desired frequency.
• Push
,
then push [ENT•WX] to select a weather channel.*
• Set the desired frequency or weather channel* using [DIAL] or
keypad.
e Push
,
then push [MR•MW] to enter the memory writ-
ing mode.
• “M”, Memory BANK and memory channel number are blink.
r Rotate [DIAL] to select the desired memory channel
number.
• Push , then push [0•BANK], and rotate [DIAL] to select the
BANK number if desired.
• Push [CLR•DEL], [ENT•WX] or push then push [0•BANK] to
exit the BANK selection mode.
t Push [ENT•WX] to program the information into the chan-
nel and return to the frequency mode.
*Weather channel: U.S.A. version only.
(or rotate [DIAL])
(or rotate [DIAL])
Push
Push
Push
Push
Push
or
or
Push
Push
Push
or
• EXAMPLE: Programming WX-05* into memory BANK 3/
memory channel 9.
2
3
1
4
5
6
7
9
10
8
12
13
11
14