6
MENU SCREEN
6-6
Clock
Clock Adjust
Sets the date and time.
p. 6-17
Clock Auto Adjust
Selects whether or not to automatically adjust the clock with data from the internal GPS
receiver.
p. 6-17
Clock Display
Displays the current time on the transceiver’s LCD.
p. 6-17
DST (Daylight Saving Timer)
Selects whether or not to use Daylight Saving Time (DST) for the clock.
p. 6-17
Vibration
Opening Vibration
Selects whether or not to vibrate the transceiver when it is turned ON. (Portable only)
p. 6-17
Vibration
Turns the Vibration function ON or OFF. (Portable only)
p. 6-17
Key Vibration
Selects whether or not to vibrate the transceiver when a user pushes a key.
(Portable only)
p. 6-17
Sensor
Man down Angle
Sets the Emergency mode detection angle for the Man Down function. (Portable only)
p. 6-18
Motion Sense
Sets the acceleration sensor sensitivity to detect whether the user is moving or not, for
the Motion Detection function. (Portable only)
p. 6-18
Stationary Sense
Sets the acceleration sensor sensitivity to detect if the user is stationary or not for the
Stationary Detection function. (Portable only)
p. 6-18
Display
Backlight
Sets the Key Backlight status.
p. 6-18
Brightness
Sets the LCD brightness level.
p. 6-18
Dimmer
Sets the LCD dimmer level.
p. 6-18
LCD Color Test
Checks whether or not the LCD displays color correctly.
p. 6-18
LCD Mode
Sets the LCD Mode.
p. 6-18
Menu items (Continued)
☞ Continued on the next page
To Next Page
Loading...
Need help?
General
