Icom IC-M601 - 4-1-4 2 ND IF AND DEMODULATOR CIRCUITS; CHANNEL 70 AND OTHER CHANNELS CIRCUITS

offered by Busse-Yachtshop.com
5
2
PANEL DESCRIPTION
➥ Number input: ‘5’
➥ Comment input: ‘5,’ ‘J,’ ‘K,’ ‘L,’ ‘j,’ ‘k’ or ‘l’
➥ After pushing [F], sets the displayed channel
as a tag (scanned) channel. (p.15)
➥ While pushing [H/L], push for 3 sec. to clear all
tag channels. (p.15)
➥ Number input: ‘6’
➥ Comment input: ‘6,’ ‘M,’ ‘N,’ ‘O,’ ‘m,’ ‘n’ or ‘o’
➥ No secondary function
➥ Number input: ‘7’
➥ Comment input: ‘7,’ ‘P,’ ‘R,’ ‘S,’ ‘p,’ ‘r’ or ‘s’
➥ After pushing [F], turns the HAILER function
ON or OFF. (p. 33)
➥ Number input: ‘8’
➥ Comment input: ‘8,’ ‘T,’ ‘U,’ ‘V,’ ‘t,’ ‘u’ or ‘v’
➥ After pushing [F], turns the AUTOMATIC
FOGHORN function ON or OFF. (p. 34)
➥ Number input: ‘9’
➥ Comment input: ‘9,’ ‘W,’ ‘X,’ ‘Y,’ ‘w,’ ‘x’ or ‘y’
➥ After pushing [F], turns the INTERCOM func-
tion ON or OFF. (p. 36)
➥ Number input: ‘0’
➥ Number input: Push for 1 sec. to edit ‘A.’
• Inputing “A” for simplex channels.
➥ Comment input: ‘0’ and symbols (‘–’ ‘/’ ‘.’)
➥ No secondary function
Fixes input of channel number and channel com-
ment, etc.
Clears entered digits and retrieves the previous
channel or channel comment during setting.
2