Icom IC-M601 - HM-134 AND HM-137 BOTTOM VIEWS

offered by Busse-Yachtshop.com
■ Set mode items
DD
Scan type
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
DD
Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been re-
ceived on channels except for Channel 16.
DD
Dual/Tri-watch of COMMANDMIC
(Appears when connecting HM-134)
This item sets the HM-134’s [DUAL•IC] switch function as
dual watch or tri-watch.
DD
Beep tone
You can select silent operation by turning beep tones OFF, or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON.
The optional HM-134 has it’s own setting for the beep tone.
Beep
˘ON
˘OFF
--Set Mode--
˘Polling Request
˘Position Request
˘OFF
˘<ENT˘OK>
(Default: ON)
Dual/Tri COMMANDMIC
˘Tri-watch
˘OFF
--Set Mode--
˘Polling Request
˘Position Request
˘Dualwatch
˘<ENT˘OK>
(Default: Dualwatch)
Scan Timer
˘ON
˘All Ships Call
--Set Mode--
˘Polling Request
˘Position Request
˘OFF
<ENT˘OK>
(Default: OFF)
Scan Type
˘Priority
˘All Ships Call
--Set Mode--
˘Polling Request
˘Position Request
˘Normal
<ENT˘OK>
(Default: Normal)
38
8
SET MODE