59
14
HM-134 CONNECTIONS AND INSTALLATION
■ HM-134 supplied accessories
Accessories included with the HM-134: Qty.
q Connection cable (OPC-1000: 6 m) ............................... 1
w Mounting base ................................................................ 1
e Microphone hanger ........................................................ 1
r Screws (M3 × 16; tapping) ............................................. 5
■ Installation
The optional HM-134 can be connected to the transceiver di-
rectly, as well as via the supplied connection cable for longer
distance remote operation. The connector of the connection
cable can be installed into a cabinet, wall, etc., as a built-in
plug.
For longer distance remote operation, the optional extension
cable, OPC-999 (6 m; Connecting between transceiver and
the connection cable), is available, and up to 2 OPC-999 can
be added.
q Insert the supplied cable into the external microphone jack
and tighten the cable nut as shown below.
To Next Page
Loading...
