8
3
BASIC OPERATION
■ Channel selection
DD
Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
dualwatch and tri-watch. While standing by, you must monitor
Channel 16.
➥ Push [16•C] momentarily to select Channel 16.
➥ Push [DIAL] to return to the condition before selecting
Channel 16, or rotate [CHANNEL] to select operating chan-
nel.
DD
Call channel
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during tri-watch. The
call channels can be programmed (p. 11) and are used to
store your most often used channels in each channel group
for quick recall.
➥ Push [16•C] for 1 sec. to select the call channel of the se-
lected channel group.
•“CALL” and call channel number appear.
• Each channel group may have an independent call channel after
programming a call channel.
➥ Push [DIAL] to return to the condition before selecting the
call channel
, or rotate [CHANNEL] to select an operating
channel.
To Next Page
Loading...
