20
6
DSC OPERATION
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “Manual Input,” push [ENT].
• The ID code for the individual call can be set in advance. (p. 24)
• When “Manual Input” is selected, set the 9-digit ID code for
the individual you wish to call with the keypad.
r Rotate [CHANNEL] to select a desired intership channel
or “Manual Input,” push [ENT].
•Intership channels are already preset into the transceiver in rec-
ommending order.
• When “Manual Input” is selected, rotate [CHANNEL] to se-
lect the desired channel other than Channel 70.
t Push [ENT] to transmit the individual call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
y Standby on Channel 70 until an acknowledgement is re-
ceived.
u When the acknowledgement is received, the display
changes to the previously selected channel with beeps.
i Push and hold [PTT] to communicate to the responding
ship.
To Next Page
Loading...
