22
6
DSC OPERATION
DD
Transmitting All ships call
Large ships use Channel 70 as their ‘listening channel.’ When
you want to announce a message to these ships, use the ‘all
ships call’ function.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “All Ships Call,” push
[ENT].
e Rotate [CHANNEL] to select the desired category, push
[ENT].
r Push [ENT] to transmit the all ships call.
• Channel 70 is selected and the all ships call is transmitted.
t After the all ships call has been transmitted, the following
indication is displayed.
y Push [CLR] to exit the condition and the display changes
to Channel 16.
•Even if [CLR] hasn’t been pushed, the display automatically
changes to Channel 16 after 5 sec. of inactivity.
To Next Page
Loading...
