Icom IC-M601 - AF UNIT DISASSEMBLY; UT-112 VOICE SCRAMBLER INSTALLATION

offered by Busse-Yachtshop.com
q TRANSMIT POWER SWITCH [H/L]
➥ Toggles high or low power when pushed. (p. 10)
• Some channels are set to low power only.
➥ While pushing this switch, some switches perform sec-
ondary function.
w VOLUME CONTROL [VOL] (p. 10)
Adjusts the audio level.
e SQUELCH CONTROL [SQL] (p. 10)
Sets the squelch threshold level.
r DIAL SWITCH [DIAL] (p. 9)
➥ Exits from Channel 16 or call channel when pushed mo-
mentarily. (p. 8)
➥ While pushing [H/L], push to select one of 2 regular
channels in sequence. (p. 9)
•International and U.S.A. channels are available for regular
channels. (depends on version)
t CHANNEL SELECTOR [CHANNEL] (p. 10)
Rotate [CHANNEL] to select the operating channels, set
mode contents, etc.
y CHANNEL 16/CALL CHANNEL SWITCH [16•C]
➥ Selects Channel 16 when pushed. (p. 8)
➥ Selects call channel when pushed for 1 sec. (p. 8)
•“CALL” appears when call channel is selected.
➥ Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (p. 11)
➥ While pushing [H/L], enters channel comment program-
ming condition. (p. 11)
➥ While turning power ON, enters set mode when pushed
and held. (p. 37)
u POWER SWITCH [POWER]
Push to turn the transceiver power ON or OFF.
i CLEAR SWITCH [CLR]
Push to cancel the entered function.
o DISTRESS SWITCH [DISTRESS] (p. 18)
Transmits distress call when pushed for 5 sec.
!0 FUNCTION SWITCH
[F]
After pushing, activates the secondary functions.
• “F” appears when a secondary function can be accessed.
!1 DSC MENU SWITCH [MENU] (p. 16)
➥ Toggles the DSC menu ON or OFF when pushed.
PANEL DESCRIPTION
3
2
2