29
9
DSC OPERATION
D Sending an Individual Acknowledgement
When you have received an Individual call (p. 36), send an Acknowledgement to the
calling station. When the Auto Ack is set to “Manual,” you can select an appropriate
acknowledgement type.
1. While an Individual call is being received, push
to turn OFF the alarm.
2. Push
.
• The received call’s information is displayed.
L If you cannot communicate, and want to return to the
operating screen, push
.
L If you want to hold the RX call task, and return to the Main
screen, push
.
L If you want to send an Acknowledgement “Able to comply”
right away, push
.
3. Push .
• The “Compose Other” screen is displayed.
4. Select the Acknowledgement type in the “Comply” item.
Able Comply:
Sends an Acknowledgement without any
changes.
Unable Comply:
Sends an Acknowledgement but cannot
communicate.
New Channel:
Able to communicate but proposes another
channel. Specify the channel by pushing
[▲] or [▼] in the “Channel” item.
(Example: Channel 69)
5. Push to send the Acknowledgement.
To Next Page
Loading...
Need help?
General
