55
11
OTHER FUNCTIONS
■ Waypoint
Waypoints are GPS position data points of places you want to go to, the position of
your own vessel, or of a vessel you received a DSC call from. You can enter up to
50 Waypoints with names of up to 15 characters. You can enter your current position
information, or add one as a destination or landmarks you often go to, as information for
easy access.
D Using the Waypoint list screen
The transceiver saves up to 50 waypoints in the Waypoint list.
1. Open the “Waypoint” screen.
[MENU] > Navigation > Waypoint
2. Push [▲] or [▼] to select a waypoint.
3. Push the Software Key below for your next operation.
:
(Add)
Enters a waypoint. (p. 56)
:
(Edit)
Edits the selected waypoint. (p. 57)
:
(Delete)
Deletes the selected waypoint. (p. 57)
:
(Detail)
Displays the details on the selected waypoint.
L You can also edit or delete the waypoint, or
start navigation to the waypoint on the details
screen.
:
(Navigation)
Starts navigation to the selected waypoint.
(p. 57)
:
(Sort)
Sorts the waypoints by Name or Range.
The details screen
NOTE: For the other functions operation, the transceiver must be receiving valid GPS
signals, or your position must be entered. (p. 23)
To Next Page
Loading...
Need help?
General
