Icom IC-M94D User Manual

67
12
MENU SCREEN
D Radio
Call Channel
You can change your Call channel. The
default setting may di󰀨er, depending on
the transceiver version.
L See page 15 for details.
WX Alert
For the USA version, an NOAA broadcast
station transmits a Weather Alert tone
before any important weather information.
L See page 14 for details.
ON with Scan:
The preset Weather channels
are sequentially checked while
scanning.
ON: The previously selected (last used)
Weather channel is checked while
scanning.
OFF: The Weather Alert tone is not
detected.
Monitor
Hold down [VOL/SQL] for 1 second to
turn ON the Monitor function. The squelch
opens.
You can select whether the squelch closes
when you release [VOL/SQL], or when you
push any key.
Push: The squelch stays open while
holding down [VOL/SQL].
Hold: The squelch stays open until you
push any key.
Favorite CH
You can set all channels as Favorite
channels, clear all settings, or reset to
default. By default, some channels are
preset. The Favorite channels di󰀨er,
depending on the transceiver version.
L See page 20 for details.
Set All Channels: Sets all channels as
Favorite channels.
Clear All Channels: Clears all Favorite
channels.
Set Default: Resets Favorite
channels to the
default.
RT Indicator
Select whether or not to display the
Radio Telephone indicator (RT) while in
the RT mode. This indicates that while
RT is displayed, you can make a voice
communication except for a DSC call.
L When “ON” is selected, “STBY” is
displayed while in the standby mode,
and “DSC” is displayed while in the DSC
mode.
ON: The RT indicator is displayed.
OFF: The RT indicator is not displayed.
Channel Display
You can select the number of digits to
display the channel number.
L This setting may not be usable, depending
on the transceiver version or presetting.
3 digits: The channel number is displayed
in 3 digits, such as “01A.”
4 digits: The channel number is displayed
in 4 digits, such as “1001.”
D Radio Info
[MENU] > Radio Info
You can check your transceiver’s software
version and GPS module version on the
“Radio Info” screen.

Icom IC-M94D Specifications

General

Brand	Icom
Model	IC-M94D
Category	Transceiver
Language	English