Icom IC-V8 User Manual

9
2
ACCESSORIES
‘‘
Accessory attachment
D Antenna
Attach the antenna to the transceiver as il-
lustrated at right.
Keep the jack cover attached when jacks are
not in use to avoid bad contacts.
D Belt clip
Attach the belt clip to the transceiver as illustrated below.
To attach the belt-clip
To release the belt-clip

Icom IC-V8 Specifications

General

Frequency Range	136-174 MHz
Power Output	5.5 W
Mode	FM
Receiver Sensitivity	0.16 μV (12dB SINAD)
Channel Spacing	12.5/25 kHz
Voltage	7.2 V DC