Icom IC-V8 User Manual

39
10
PAGER/CODE SQUELCH
‘‘
Pager function
This function uses DTMF codes for paging and can be used as a
“message pager” to confirm you of a caller’s identification even
when you leave the transceiver temporarily unattended.
Optional UT-108 required
Pager selective code (push [PTT])
Beep
B
eep
Beep
Answer back (manual)
Beep
Beep
Beep
Set both transceivers to either
code squelch or non-coded operation
Communication

Icom IC-V8 Specifications

General

Frequency Range	136-174 MHz
Power Output	5.5 W
Mode	FM
Receiver Sensitivity	0.16 μV (12dB SINAD)
Channel Spacing	12.5/25 kHz
Voltage	7.2 V DC