New2001
26
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Transmit power selection
The transceiver has four output power levels to suit your op-
erating requirements. Lower output power during short-range
communications may reduce the possibility of interference to
other stations and will conserve battery power.
➥
Hold down [LOW] for 1 second to toggle the transmit
approximately output power between High (5 W), S-Low
(0.1 W), Low (0.5 W) and Mid (2.5 W).
•Orwhileholdingdown[LOW]
, rotate [DIAL] to select the
output power.
■ Key Lock function
Activate to prevent accidental frequency changes and unnec-
essary function access.
Hold down [LOCK] ➥
for 1 second to turn the Key Lock
function ON or OFF.
•WhiletheKeyLockfunctionisactivatedandthelockedkeyor
dial is pushed or rotated, “LOCK ON” will be displayed.
• , [VOL], [SQL], [PTT] and [LOCK] are operable while
the lock function is activated.
• Either or both the squelch control and volume control can also
be locked in the Function menu.
High power
Mid power
Low power
S-Low power
When using the BP-
273 battery case, the
output power is limited
to approximately 100
milliwatts.
MENU ➪FUNCTION ➪Key Lock (p. 44)
The function is ON
The function is OFF
Appears
To Next Page
Loading...
