Icom ID-31A

New2001
59
10
OPTIONS
New2001
D Turning the VOX function ON or OFF
Push [MENU] q to enter the
Menu screen.
Push D-pad( w E) to select the root
item (Function), and then push D-
pad(Ent) to go to thenextscreen.
D-pad
(�)
(Ent)
( MENU ➪ FUNCTION ➪ VOX ➪VOX)
Refer to the menu sequence show e
directly above and push D-pad(E)
to select, and then D-pad(Ent) to
enter, one or more times until the
last screen is displayed.
r Push D-pad(E) to select “ON.”
t Push [MENU]
toexittheMenu
screen.
• “VOX” appears.
Set the microphone gain before set-
ting the VOX gain in the Menu
screen. We recommend setting the
microphone gain to 3.
( MENU ➪FUNCTION ➪ VOX ➪ MIC
Gain (External))
D VOX-related settings
The VOX Level, the VOX Delay, and the VOX time-out timer
can be set in the Menu screen.
• VOX Level
Push [MENU] q
to enter the
Menu screen.
Push D-pad( w E) to select the root
item (Function), and then push D-
pad(Ent)togotothenextscreen.
D-pad
(�)
(Ent)
( MENU ➪FUNCTION ➪VOX➪VOXLevel)
Refer to the menu sequence show e
directly above and push D-pad(E)
to select, and then D-pad(Ent) to
enter, one or more times until the
last screen is displayed.
r While speaking into the headset mi-
crophone, adjust the VOX Level until
“VOX” continuously appears.
 •The VOX Level can be adjusted be-
tween1(minimum)and10(maximum),
or turned OFF. Higher values make the VOX function more sensi-
tive to your voice. (default: 5)
You cannot use the VOX function or transmit while in the
Menu screen.
Appears
“VOX”