87
New2001New2001
MAINTENANCE
9
New2001
■ Resetting
Occasionally, erroneous information will be displayed when,
for example, first applying power. This may be caused exter-
nally by static electricity or by other factors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If the prob-
lem is still there, perform a Partial reset or an All reset.
A Partial reset resets the operating settings to their default
values (VFO frequency, VFO settings, menu contents) with-
out clearing the items below:
• Memory channel contents • Scan Edge contents
• Call channel contents • Call sign memories
• Message data • DTMF memory contents
• GPS Memory contents • Repeater list
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. See the Full
Manual for details.
D Partial Reset
Touch [MENU]. q
Touch “Reset.” w
(Manage Memory > Others > Reset)
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
Touch “Partial Reset.” e
Touch [YES]. r
• The transceiver displays "PARTIAL RESET," then the
partial reset is completed.
To Next Page
Loading...
