57
5
RECORDING A QSO ONTO AN SD CARD
New2001 New2001
■ Recording a QSO audio
Touch the Function group icon one or more times. q
• When the DR screen is displayed, selects the D-3 menu.
• While in the VFO, Memory or Call CH mode, displays the F-3
menu.
Touch [REC]. w
• The “Recording started” dialog box appears, and voice recording
starts.
• “ ” is displayed while the transceiver is recording.
• “ ” is displayed while the recording is paused.
• Recording is continuous until you manually stop recording, or
the card becomes full.
• If the recording le’s content reaches 2GB, the transceiver auto-
matically creates a new file, and continues recording.
Touch the record icon. e
• The “Stop recording?” dialog box appears.
Touch [YES]. r
• The “Recording stopped” dialog box appears, and voice record-
ing stops.
For your reference:
When the PTT Automatic Recording function is set to ON
in the MENU screen, the recording automatically starts
when [PTT] is pushed.
( Voice Memo > QSO Recorder > Recorder Set >
PTT Auto REC)
NOTE:
Once the voice recording starts, it will continue until
you stop recording, even if you turn OFF the trans-
ceiver.
To Next Page
Loading...
