New2001
82
8
INSTALLATION AND CONNECTIONS
New2001
8
INSTALLATION AND CONNECTIONS
D When installing to a flat surface
You can install the controller on a flat surface with the optional
MBA-2*
1
c o n t r o l l e r b r a c k e t .
When attaching the bracket onto a wall, use a self-tapping
screw*
2
(3 mm(d)).
*
1
MBA-2 may be supplied, depending on the transceiver’s version.
*
2
Purchase separately
Magnet
Screw
Supplied with the MBA-2
Attach the magnet to the
Controller bracket
Screw (3 mm(d))
Purchase separately
MBA-2
When attaching the bracket
onto a wall
About GPS antenna D
The GPS antenna is located at the top back of the controller.
If the controller’s rear panel is covered with any object that in-
terrupts the GPS signals from the satellites, the GPS receiver
will not calculate its position.
Therefore, when you are using the GPS feature, be sure the
controller is positioned so the antenna has a clear view to
receive signals from the satellites.
GPS antenna
GPS antenna
Controller
To Next Page
Loading...
